Thread
Print

Nikon P5100 for digiscoping

Nikon P5100 for digiscoping

I bought the new Nikon P5100 yesterday, hoping that it would be a bit faster than the P5000.  It's not.  It takes the same adapter as it's the same body and lens with 12.1 megs. It starts to slow down after about 3 frames as it processes the 12.1 meg files .  The images look good and the noise is ok up to iso 400.  Here is a sample from this morning. Neil

Lamma Island,
Hong Kong,
China.

30/09/07



TOP

This is a test at full camera zoom (26 mm or 120 mm ).The second photo is adjusted in CS2. Neil.
ps using the Swarovski 45x eyepiece






TOP

Robert,
          Did you check the Exif on the second photo?  The first photo is just a reference to show the distance.  I usually use a second camera for this as I had the Swarovski DCA adapter on the P5100 on the scope.  
Neil.

TOP

Wing,
       This is an excellent image. There are a lot of good digicams out there now that can take good images if there is a good adapter for them.  All we need now is good light.
        I found with the P5100 that near full camera zoom it's best to use manual focus as the camera's AF has trouble in the hazy light.
        I did some tests this morning with the Nikon CP4500, Canon A640 and the P5100.  I'll post some results later.
Neil.

TOP

Here is an image from the Nikon CP4500 and the Canon A640 taken today of the same drongo from the same distance.  Neil.

Nikon CP4500/Canon A640 plus Swarovski STS80HD scope and Sw30x eyepiece and DCA adapter

Lamma Island,
Hong Kong,
China.
07/10/07





TOP

Robert,
          Thanks.  You're right.  The 4500 image is the first one.  I think I ran Auto Color through the Canon A640 image (second ) which is why the color looks a little different.  Neil.

TOP

Thread